GALVANIZED PLASTERING ANGLE
Plaster works
Technical characteristics
Type of angle: plastering
Kind of angle: without reinforcing mesh
Material: galvanized steel
Length, m: 2.5/ 3.0
Width, mm: 36х36, 50х50
Quantity in the package, pcs.: 25
for forming corners by the “wet” method inside the room as well as for strengthening corners and protecting against mechanical influences.
possibility of forming perfectly equal corners;
reliable adhesion to the plaster;
protection of building corners from damage;
possibility of applying a thick layer of plaster.
At the first stage of installation, one should prepare the work surface and “fit” the angle in size using tin shears. Next, the plaster is applied to the corner of the wall, into which the angle is pressed. The mounting points of the angle should be no more than 60 cm from its middle. In the next step, the remnants of the mixture are removed from the angle with a putty knife and the structure is left to dry completely. After that, the surface is sanded. If the angle is installed correctly, a protrusion will be visible on the corner edge. In case the surface has significant irregularities, it is allowed to use nails or screws for accessory mounting (but it is especially important to use high-quality stainless materials).