PERFORATED PLASTIC ANGLE WITH A MESH
Plaster works
Technical characteristics
Type of angle: plastering
Kind of angle: with reinforcing mesh
Material: PVC
Length, m: 2.5/2.6/3.0
Width, mm: 70х70, 100х100, 100х150
Mesh density, g/m2: 115–120 (yellow), 140 (red), 160 (white)
Quantity in the package, pcs.: 50
for reinforcing and protecting corners from chips, damage and cracks inside rooms and facades, door and window slopes in facade insulation systems by the “wet” method.
increasing the strength of corners;
protection of the plaster layer from cracks;
possibility of making perfectly equal corners;
reliable adhesion to the plaster;
corrosion protection.
The angle should be tightly pressed to the freshly applied adhesive mixture. The product must be pressed in such a way that the solution can penetrate through the holes of the corner. At the next stage of installation, one needs to adjust the angle of inclination using a spirit level. Next, one is to level the adhesive mixture with a putty knife and reinforce the “wings” of the profile together with the plaster mesh. After that, leave to dry. The use of an angle significantly simplifies the process of construction works during the installation of facade thermal insulation and the removal of corners by the “wet” method. The reinforcing mesh provides additional adhesion and protection of the junction of the corner and the surface.