PERFORATED PLASTIC STRAIGHT ANGLE
Plaster works
Technical characteristics
Type of angle: plastering
Kind of angle: without reinforcing mesh
Material: PVC
Length, m: 2.5/3.0
Width, mm: 19х19, 22х22, 23х23
Quantity in the package, pcs.: 50
for reinforcing and protecting corners from chips, damage and cracks inside rooms, door and window openings.
protection from physical loading;
increasing the strength of corners;
protection of the plaster layer from cracks;
possibility of making perfectly equal corners;
reliable adhesion to the plaster;
corrosion protection.
The angle should be tightly pressed to the newly applied putty mixture. The product must be pressed in such a way that the mortar can penetrate through the angle holes. At the next stage of installation, one needs to adjust the angle of inclination using a spirit level. Next, level the putty using a putty knife with the wall and let it dry. Then sand the putty. If the profile is installed correctly, its corner protrusion should be visible on the corner edge. The use of an angle significantly simplifies the process of construction works.