PLASTERING PLASTIC ANGLE
Plaster works
Technical characteristics
Type of angle: plastering
Kind of angle: without reinforcing mesh
Material: PVC
Length, m: 2.5/3.0
Width, mm: 40х40
Quantity in the package, pcs.: 50
for forming corners by the “wet” method inside the room as well as for strengthening corners and protecting against mechanical influences.
possibility of forming equal corners;
reliable adhesion to the plaster;
high-quality protection of corners against damage;
possibility of working with a thick layer of plaster;
corrosion resistance.
At the first stage of installation, one should prepare the work surface and “fit” the angle in size using tin shears. Next, the plaster is applied to the corner of the wall, into which the corner is pressed. If the surface has significant irregularities, it is allowed to use stainless steel screws for accessory mounting. The mounting points of the corner should be no more than 60 cm from its middle. Immediately after pressing the product, until the mixture has hardened, one needs to adjust the angle of inclination using a spirit level. After that, the remnants of the mortar are removed with a putty knife and the structure is left to dry completely. If the corner is installed correctly, a protrusion will be visible on the corner edge.