ADJOINING WINDOW PROFILE WITH A MESH
Interior works
Technical characteristics
Type of profile: for a window
Kind of profile: with reinforcing mesh
Material: PVC
Length, m: 2.5
Width, mm: 3/6/9
Width of the mesh, mm: 100
Colour: white, graphite, brown, golden oak
Number of pieces in the package: 20/25
for forming window slopes, executing the expansion joint between the window frame and the plaster.
- thickening and sealing of assembly joints;
- corners strengthening;
- prevention of cracks between plaster and window frame, intensified reinforcement due to the mesh;
- protection against moisture penetration under the thermal insulation material of the window block;
- simple and neat decoration of the space around the window.
The window profile is installed in window slopes inside and outside buildings. Works must begin with cleaning, drying and degreasing the window frame surfaces. The next step is to remove the yellow protective foil from the foam of the window profile and stick it to the frame. After that, one should leave the structure to dry for at least 2 hours and proceed to the next stage, which is sticking a protective foil that will protect the window and the glass unit from contamination with the plaster. To do so, one removes the protective foil from the profile under which there is an adhesive polyethylene strip, whereto the profile adheres. The plaster should be applied so that it can penetrate into the profile groove. The rest of the plaster should be carefully cut with a putty knife on the profile edge. After the plaster has dried, the removable part should be removed from the profile, and the protective foil should be removed from the window.